Hirschmann BRS50-8TX/4SFP 942170010: Four 2.5G Uplinks Change the Design Conversation

BRS50-8TX/4SFP · BRS50-00122Q2Q-STCY99HHSESXX.X.XX · Order No. 942170010

becky@hkxytech.com
+86 15972186287

Why this model matters now

Industrial networks are absorbing machine-vision streams, edge analytics, historian traffic and remote-service sessions at the same time. Under normal conditions a 1G uplink may look adequate; during a production surge or ring failover, that same link can become the hidden bottleneck. The BRS50-8TX/4SFP gives engineers four fiber paths capable of 2.5G, allowing separate production zones, redundant aggregation and staged bandwidth upgrades without replacing the access switch.

The key purchase decision is therefore not simply “four SFP slots.” It is whether the network needs four flexible uplinks with 2.5G growth room.

Verified configuration snapshot

Application-engineer warning: 2.5G is an end-to-end BOM

A 2.5G-capable slot does not make every SFP run at 2.5G. Confirm the exact transceiver speed, wavelength, fiber type, reach and connector; then confirm that the far-end port supports the same data rate. A 1G-only optic or aggregation port will define the link speed. Also calculate traffic during a link or ring failure—not only during normal operation.

BRS40 or BRS50?

RFQ checklist

1. Exact model: BRS50-8TX/4SFP.

2. Configuration: BRS50-00122Q2Q-STCY99HHSESXX.X.XX.

3. Order number: 942170010.

4. Quantity, destination country and required delivery date.

5. Fiber type, wavelength, distance and target speed for every SFP link.

6. Ambient temperature, redundancy protocol and software requirements.

Buyer FAQ

Is 942170010 the BRS50-8TX/4SFP order number?

Yes. The standard-temperature configuration discussed here is order number 942170010.

Are the SFP modules included?

Treat optics as separate BOM items unless the quotation explicitly includes them. Specify speed, wavelength, fiber type and reach.

Is this exact configuration suitable for –40 °C?

No assumption should be made. This ST configuration is listed for 0 °C to +60 °C; choose and verify the corresponding EEC variant for extended-temperature projects.

Hirschmann BOBCAT BRS models currently hot-selling

All products below are currently hot-selling and actively requested. Availability varies with project demand; send the exact configuration and order number for a current quotation.

Notice: Hirschmann and BOBCAT are trademarks of their respective owner. HONGKONG XIEYUAN TECH CO., LIMITED is an independent supplier. Specifications and availability must be confirmed at quotation stage.